Lacp Fallback. 8325 VSX MCLag to 6300M Wired Intelligent Edge Static fallback: the port channel maintains one active port while in fallback mode; all its other memberports are in standby mode until a LACP PDU is received by the port channel.All member ports send(and can receive) LACP PDUs, but only the active port sends or receives data With the LACP Fallback feature configured, the router allows the server to bring up the LAG, before.
Link Aggregation and LACP SSN Docs from www.juniper.net
It is recommended to enable LACP fallback on the switch if the switch is supported Static fallback: the port channel maintains one active port while in fallback mode; all its other memberports are in standby mode until a LACP PDU is received by the port channel.All member ports send(and can receive) LACP PDUs, but only the active port sends or receives data
Link Aggregation and LACP SSN Docs
The LACP Fallback feature allows an active LACP interface to establish a Link Aggregation Group (LAG) port-channel before the port-channel receives the Link Aggregation and Control Protocol (LACP) protocol data units (PDU) from its peer LACP fallback in VLT allows the PXE boot server to establish a connection over a single port, download the boot image, and continue the boot process The fallback timeout interval is configured with the port-channel LACP fallback timeout command
LACP vs PAGP How They Differ for Network Redundancy. WARNING: Even though this command appears to be accepted on a standard/non-VSX LAG, the fallback feature works only on a VSX LAG (multichassis LAG) interface Individual fallback: all member ports act as individual switch ports while in.
Link Aggregation and LACP SSN Docs. The no port-channel lacp fallback variant of the command disables the feature The LACP Fallback feature allows an active LACP interface to establish a Link Aggregation Group (LAG) port-channel before the port-channel receives the Link Aggregation and Control Protocol (LACP) protocol data units (PDU) from its peer